Lanrui V1 Battery Card Efficiency Extension Cable 11 to 15 series
>
Rs. 4500
Descriptions
Battery efficiency repair cable:
1. Support IOS: 15-17. 3 old system, connect the ribbon cable and plug in the data cable, turn on the device, wait for the battery level indicator to appear in the upper right corner, then turn off the device. Wait for 5 seconds before turning on the device, and check the battery in the system to see if it is 100% repaired
2. Supports systems above 17.4, and can be flashed through software such as Aisi, Hourglass, 3U, etc. Default 100%, powerful functions such as automatic reading of original machine loops, to avoid flashing and turning red
Models
3. Support 12 and above, and systems 18.1 and above support no flash repair. 100% of the battery can be repaired by installing the original disassembled battery into the phone for battery diagnosis. After completing the battery diagnosis, turn off the phone and remove it. Then, connect the repair cable to the original battery for a second diagnosis. After completion, the phone will be 100% repaired
Note: Do not connect Aisi in the middle. After diagnosing the original battery, install it (to avoid turning red)
4. Pay attention to fastening the motherboard end, and gently fasten and press it to avoid damage
